So far, Resolution Series power amplifiers came as stereo units. When designed correctly, a 2-channel amplifier can perform superbly. Some applications, however, demand a single channel power amplifier. For these, the new FM 111 was developed.
For applications where a single channel high power amplifier with ultimate reproduction quality is required the FM 115 is the absolute choice. The FM 115 is for speaker systems that demand an amplifier that can effortlessly provide high output voltage and high current. It drives any speaker in an unparalleled manner. The brand new FM 115 employs complete Resolution Series technology and uses advanced true balanced Class A stages combined with the world's best amplifier and speaker protection systems.
It is with great joy that FM ACOUSTICS announces the "MK-II" version of the FM 411. The original winner of the coveted "Component Of The Year" award. Recently, new parts have become available that - together with advanced insights from continuous research - allow the first amelioration since 1994. With such a background, the refinements can of course not be "tremendous". They result in some smaller refinements but also some more substantial improvements - as described Click here
Proprietary electronically balanced discrete enhanced class A circuitry, non-polarized, floating ground, non- inverting or inverting mode. Optimal performance with either balanced or unbalanced (single-ended) sources. Unbalanced sources are automatically balanced right at the input of the FM 611. 650 W rms into 2 Ohms
Proprietary electronically balanced discrete enhanced class A circuitry, non-polarized, floating ground, non- inverting or inverting mode. Optimal performance with either balanced or unbalanced (single-ended) sources. Unbalanced sources are automatically balanced right at the input of the FM 611X. 700 W rms into 2 Ohms
No minimum impedance. Designed for 1 Ohm to 10'000 Ohm systems. Can drive any speaker impedance (even below 1 Ohm) with dynamic (music) signals without any limiting, compression or other negative effects on the audio signal. Despite this, the amplifier is fully protected against short circuits, open circuits and all other adverse conditions via a unique onboard computer that continuously surveys all important parameters.
Tremendous headroom and reserves in input signal handling capability Zero overall feedback / feed forward Discrete Class A tape send and return buffers against superior recordings No more matching problems between electronics and cables
It is a pleasure to announce the "MK-II" version of the FM 255. Providing an ideal combination of symmetrical and unsymmetrical signal handling with an unbeatable price/performance ratio the FM 255 has rapidly become the most successful preamplifier/line stage.
We are very pleased to be able to announce the "MK-II" version of the FM 266. Recently, new parts have become available that - together with advanced insights due to R+D - allow the first amelioration in 15 years.
The FM 122 MKII gives record collections an entirely new life. The ultimate solution in phono pre amplification. Unique continuously variable de-emphasis controls allow correct replay curves of any record ever issued. Extremely low noise and hum levels. Ultra high-accuracy RIAA de-emphasis. The FM 122 and FM 222 are the only preamplifier able to provide truly accurate reproduction of vinyl LP's. Unlimited combinations of cartridge loading allows fine tuning to any MC or MM cartridge - now and in the future.
Recently, new parts have become available that - together with advanced insights due to continuous research - allow further ameliorations. The refinements manifest themselves in some smaller modifications but also some more substantial improvements.
It is a pleasure indeed to announce the "MK-III" version of the FM 222. Of course, all the original features have been kept and some new ones added. Everything has been carefully optimized.
