GREENLOGOC

Acapella Triolon Excalibur

Acapella triolon excalibur1

Official Website:
http://www.acapella.de/index.phtml

acapella_logo

ACAPELLA speakers are unique combinations of design, function and engineering. All Acapella parts are carefully handcrafted by ACAPELLA.

Product Features: Made in germay
Acapella Horn speakers available in any color

The Acapella Triolon Excalibur loudspeaker is a parallel to the Acepella Sphaeron and is characterized in all substantial aspects with the same superiority and finesse for music reproduction.

One of the characteristics of the Acapella Triolon Excalibur is an extreme range of dynamic's. Very low powered amplifiers of 15 W / channel are sufficient to achieve an extremely high level of music reproduction. 4 very fast bass units per channel have been exactly adapted to the spherical horns concerning their dynamic behavior.

Already with the small power requirements starting from 15 watts the volume range of a whole orchestra can be illustrated with this very efficient system.

Technical data
Efficiency: 94 dB / W / m
Impedance: 4 Ohm
Load capacity: 200 W - 1000 W / 10 ms
Dimensions H x W x D: Total 86" x 42" x 38"
Woofer 2160 x 350 x 703 mm
Sword 2100 x 387 x 415 mm
Weight: approx. 800 lbs per speaker Recommended power output of the amplifier from: 15 W

Acapella Spharon Excalibur

Acapella Spharon Excalibur3

Official Website:
http://www.acapella.de/index.phtml

Developed from the “classical” Spharon, the new Acapella Excalibur is raising to a new standard of dimension and variability. In consideration of the fact that the former Spharon had to be combined with a 12m2 horn unit for transmission of the lowest frequencies, the new Excalibur now can easily be integrated into living rooms having a minimum size of 40m2. Two towering pillars with four huge 15 inches woofers for each unit now are taking over the part of the low frequency horn unit.
This Acapella loudspeaker system has no limits: with 15 watts of power, music will be reproduced three-dimensional, thus giving you the illusion to be a member of the orchestra or the band. From the softest, perceptible sounds, these loudspeaker sculptures can accelerate the music like lightning, comparable only with the spurt of a racing car.
When the music is soft, the sounds caress your skin. When it changes into a powerful fortissimo, the listener will be swept away to the epitome of joy.

Product Specifications:
Efficiency: 100 dB/1W/1m
Power handling: 100 watts (Peak handling of 1000 watts at 10 ms with no distortion)
Recommended power output of the amplifier from: 15 watts
Dimensions: 90.5”x 59”x51.2” (HxWxD)
Weight: 1364 lbs. per Speaker

Acapella Campanile

Acapella campanile

Official Website:
http://www.acapella.de/index.phtml

The Acapella Campanile is a sealed 3.5-way loudspeaker system. Four 10 inch woofers are working in separate chambers and cannot influence each other. From a solo wind instrument to ensemble of a symphony orchestra with conviction the Campanile speaker system will bring you that much closer to the real experience with their exceptional depth and dynamics.

Fine adjustments to the ion tweeter and the midrange horn unit can be made in order to adapt the loudspeaker to every acoustical environment.

High Campanile This special version of the Acapella Campanile loudspeaker adds the high gloss acrylic cabinet, upgraded crossover, and proprietary ceramic silver wiring.

Technical data
Efficiency: 93 dB / W / m
Impedance: 8 Ohm
Load capacity: 200 W - 1000 W / 10 ms
Dimensions H x W x D: 94.5" x 28.5" x 38" 
Total (Horn) 2400 x 720 x 970 mm
Special 2280 x 720 x 970 mm
Weight: approx. 550 - 650 lbs. per speaker
Recommended power output of the amplifier: from 15 W

Acapella Violon MK III

Acapella violin1

The Acapella Violon MK III is a consequence further development of the Violon 1. In contrast to the Violon 1 the Violon MK III is a closed 3 way system. The dynamics of the 10 inch woofer have been adapted to the speed of the mid-range horn unit and the ion tweeter. The ion tweeter used today is the fastest high frequency transmission system in the world. It is operating without any mass and the upper range of the high frequencies can only be limited by the manufacturer himself. Bandwidth normally is adjusted to 40Khz approx. This extraordinary bandwidth is providing an extremely precise reproduction of any kind of music. Even in the lowest frequencies you can feel exact modulation of the overtones. Fine adjustments to the ion tweeter and the midrange horn unit can be made in order to adapt the loudspeaker to every acoustical environment.

 The Acapella High Violon MK III (Sub Octave) This special version of the Acepella Violon adds an additional 10 inch isobaric woofer, extra internal cabinet bracing, upgraded crossover, and proprietary ceramic silver wiring.

Product Specifications:
Frequency Response Violon: 28Hz to 40kHz
Frequency Response High Violon: 24Hz to 40kHz
Crossover Frequencies: 800Hz and 4,500Hz
Efficiency: 91 dB/1W/1m
Impedance: 8 Ohm (High-Version 4 Ohm)
Power handling: 100 watts (Peak handling of 1000 watts at 10 ms with no distortion)
Recommended power output of the amplifier from: 25 watts
Dimensions Pillar: 46" x 13" x 18" (HxWxD)
Dimensions Total: 61" x 18." x 23" (HxWxD)
Weight: 209-242 lbs. per speaker
Official Website:

http://www.acapella.de/index.phtml

 

Acapella LaCampanella

Acapella LaCampanella1

The dream of a loudspeaker developer is a single acoustic transducer capable of reproducing the deepest bass together with all the intricate and delicate highs, with the softest of rhythms yet at the same time having exceedingly wide dynamics. All the music being reproduced by a single speaker driver. The nearest approach towards this ideal is a 2-way system with the separation as wide as possible of the frequency ranges. Since the most sensitive area of the human hearing is between 1 kHz and 4 kHz together with all overtones of this frequency range, the build up of transients, sound pressure occurring under 1 kHz should also be integrated into the hearing area of the overtones from a single point source with a mass as low as possible of the membrane. Ideal would be an “exact phase point spotlight”.

Acapella has designed and engineered a new hyper spherical Horn shape with a single point source for high frequencies increasing from three to five Octaves, from 700 Hz to over 20 kHz. The newly designed horn fulfils the expectations demanded by the engineer achieving a natural output level over a wide frequency range.

product Specifications:

Technical description "LaCampanella"

1. Hyper spherical wide band horn 390 mm
a: 5th Octave Frequency, 700 Hz over 20 kHz
b: Phase-locked, 6 dB custom designed high pass filter, 750 Hz lower crossover point
c: SPL. 93 dB/1W/1m
d: Weight mass lower than 0.3 grams
2. Bass Drivers
a: 4 x 180 mm (6.5 ") 4 x 1.25 Tesla magnets.
b: Magnet weight 4 x 1.2 kg
c: SPL. 93 dB/1W/1m
3. Complete system
a: Frequency range 20Hz to 30kHz
b: Phase exact order the individual system Bass/Med frequency
c: SPL. 93 dB/1W/1m
d: Impedance 8 ohms
e: Weight 85 kg. / 187 lbs. per speaker
f: Specially developed chasses
g: Measurement B x H x T 260 (horn 390) = x 1400 x 610 mm

Product Reviews:
http://www.dagogo.com/AcapellaLaCamp-Review-Conclusion.html
Official Website:
http://www.acapella.de/index.phtml
 

Acapella LaMusika

acapellaLaMusika

The Acapella LaMusika is a two-way loudspeaker with a dome tweeter hidden within a separate removable housing.
The front plate, the tweeter housing and its support (vibration isolator) are made of Poly Granite (castes stone), the housing itself out of multiple glued wood with an intermediate layer of cork.
Due to the separate tweeter housing and the front of the bass-mid-range housing - both taking into consideration demanding acoustic aspects - The Acapella LaMusika can deliver a very exact dynamic and powerful acoustic pattern

Technical data
Efficiency: 89 dB / W / m
Impedance: 8 Ohm
Load capacity: 70 W - 200 W / 10 ms
Dimensions H x W x D: 22"x9.75"x20.3"

Weight: approx. 55 lbs per speaker
Recommended power output of the amplifier: from 20 W

Official Website:
http://www.acapella.de/index.phtml

Acapella Fidelio 2

Acapella_fidelio

Official Website:
http://www.acapella.de/index.phtml

2 Way Monitor Loudspeaker w/Stands
In 1987 Acapella hit upon the idea of developing a small speaker that would cover the complete music spectrum from classics to rock, jazz to pop, without loss of quality.
After 15 years of successful production of this recognized standard, the time has come to create its successor.
In developing a new standard, Acapella naturally took into account all the latest technology including what had been developed concerning loudspeaker design, technology and manufacturing. As a result, they were able to extend the transmission range by almost a whole octave in the bass and half an octave at the high frequencies and yet pack the speaker into a smaller enclosure than previously.
The result is a Mini Monitor for music with exact timing and dynamic clarity that astonishes professional musicians and music lovers.
The Acapella Fidelio 2 is admirably suited to the latest stereo and/or Home Theater systems. Thanks to its small dimensions, it can be integrated into any listening space. The Fidelio is exceptionally versatile; the speakers are infinitely adjustable in height and in spacing from one another. Living or listening rooms not constructed alike but the Fidelio 2 is able to achieve a realistic three-dimensional sound image in any room, whatever the design.
Three-dimensional portrayal of sound is an important step forward and is an important factor and an absolute prerequisite in the quest for natural music reproduction in the home environment.
These requirements are perfectly fulfilled by the Fidelio 2 design technology which makes amazingly simple use of the six audio channels provided for DVD Audio or SACD reproduction. The entire listening area is filled with natural-sounding three-dimensional audio, transporting you straight into the recording studio. And you will discover that the audio world is really not a flat surface.
The Acapella Fidelio 2 offers a system for natural three-dimensional sound reproduction of music within a three-dimensional sound environment while using only 3 pairs of speakers. An important factor of this new technology, the listener is no longer anchored to a "sweet spot" but enjoys an amazing sense of three-dimensional space with a natural and stable full dimensional sonic portrayal of instruments and vocals from almost all points within (and to some extent even outside) the area defined by the speaker system.

Product Specifications:
Efficiency: 88 db /1W /1m
Impedance: 8 Ohm
Power handling: 80-250W / 10ms
Recommended power output of the amplifier: from 20W
Speaker Dimensions: 12.6" x 5.9" x 14.2" (HxWxD)
Weight: 27 lbs. each
Stand: Height add 27.2", Base 10.2" x 17.9"