TECHNICAL DATA

medus_sizePower

  • · Mains voltage: 100…120 / 200…240 Volt
    Fuse rating: 500 mA slow blow
  • · Power consumption: 80 VA max.
  • · Power consumption in standby: 2 VA max.
  • Size
  • · Depth: 30 cm
  • · Width: 45 cm
  • · Height: 6,6 cm
  • · Height with feet: 7,4 cm
  • Size Remote
  • · Depth: 2,5 cm
  • · Width: 6,2 cm
  • · Height: 16,9 cm
  • Available Color

Silver, Black

Digital Inputs

  • · (3) XLR con­nec­tors
  • · (1) TOSLINK connector (optical)
  • · (3) RCA connectors
  • · (1) USB connector
  • · All inputs accept professional or consumer standard, i.e. accept AES/EBU or S/PDIF signals
  • · Sampling frequencies; single wire scheme: 44.1kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz on any of the four inputs
  • · Sampling frequencies; dual wire scheme: 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz on inputs 1 and 2
  • · DS­D64: On USB input
  • · Sampling frequency tolerance: ±80 ppm
  • · Maximum input wordlength: 24 Bits
  • Analog Outputs
  • · (2) XLR Connectors
  • · (2) RCA Connectors
  • · Servoless, DC coupled, short circuit proof output circuitry
  • · Output impedance: < 100 OO
  • · Output level: variable from --4.0 dBu to +27.0 dBu balanced on XLR connectors (--10.0 dBu to +21.0 dBu unbalanced on RCA connectors) with 0 dBFS input, in 1 dB steps (--4 dBu is 0.49 V, +27 dBu is 17.35 V, --10 dBu is 0.245 V, +21 dBu is 8.67 V)
  • · Output stage: Discrete Class A
  • D/A Converter chip
  • · Oversampling multibit sigmadelta converter
  • · Four converters per audio channel
  • Synchronization
  • · Synchronized via the input signal
  • · Extremely efficient Jitter attenuation down to subsonic frequencies
  • · Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
  • DSP algorithms

Upsampling, jitter reduction

Measurements??

The measurements below have been taken at the following conditions (unless noted otherwise): 1 kHz, +24.0 dBu output level (--3 dBFS input level), 192 kHz sampling frequency (fs).

Frequency Response:

  • · Fs = 44.1 kHz: 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 48 kHz: 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 88.2 kHz: 0 Hz…30 kHz: within ±0.75 dB
  • · Fs = 96 kHz: 0 Hz…30 kHz: within ±0.75 dB
  • · Fs = 176.4 kHz: 0 Hz…40 kHz: within ±0.75 dB
  • · Fs = 192 kHz: 0 Hz…40 kHz: within ±0.75 dB
  • Signal To Noise Ratio (SNR) at --40 dBFS input:
  • · > 129 dB un-weighted
    (relative to full scale output)
  • · > 132 dB A-weighted
    (relative to full scale output)
  • Linearity:
  • · At 0 to --100 dBFs input level:
    < ±0.05 dB deviation from ideal
  • · At --100 to --120 dBFs input level:
    < ±0.2 dB deviation from ideal
  • Total Harmonic Distortion plus Noise (THD+N) ratio:
  • · < --112 dB @ --3 dBFS input
    (0 dBFS = +27.0 dBu)
  • · < --115 dB @ 0 dBFS input
    (0 dBFS = +27.0 dBu)
  • Crosstalk:
    < --110 dB, 0.20 kHz
AUDIO LIMITS LOGO 265 wide1

702.299.0567