MAN 301 TECHNICAL DATA

man301_sizePower

  • · Mains voltage: 100…240 V, the mains voltage is automatically switched
  • · Fuse rating: 4 A slow blow for all mains voltages
  • · Power consumption: 50 W max.
  • · Power consumption in standby: 0.5 W max.
  • Size
  • · Depth: 30 cm
  • · Width: 45 cm
  • · Height: 6,6 cm
  • · Height including feet: 7,4 cm
  • · Height including feet and WiFi antenna: approx. 14 cm
  • Available Color
    Silver, Black

Digital Inputs

  • · (1) XLR connector
  • · (1) RCA connector
  • · (1) TOSLINK connector (optical)
  • · (2) Firewire 800 connectors
  • · All inputs accept professional or consumer standard, i.e. accept  AES/EBU or S/PDIF signals
  • · Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz on any of the inputs, except TOSLINK input: 96 kHz maximum
  • · Maximum input word length: 24 Bits
  • Digital Outputs
  • · (1) XLR connector
  • · (1) RCA connector
  • · (2) Firewire 800 connectors
  • · (1) USB connector
  • · Professional channel status data on the XLR and RCA outputs
  • · The dual wire mode can be activated for sampling frequencies of 176.4 kHz or 192 kHz exclusively
  • Analog Outputs
  • · (2) XLR connectors (hot on pin 2), DC coupled, short circuit proof output circuitry, output impedance 44 OO
  • · (2) RCA connectors, DC coupled, short circuit proof output circuitry, output impedance 22 OO
  • · The output level is selectable via the iPad; four settings are provided as shown below:
  • XLR Output:
  • · 7.5 Vrms, +19.7 dBu, with a 0 dBFS sine wave input
  • · 2.3 Vrms, +9.7 dBu, with a 0 dBFS sine wave input
  • · 0.75 Vrms, --0.3 dBu, with a 0 dBFS sine wave input
  • · 0.23 Vrms, --10.3 dBu, with a 0 dBFS sine wave input
  • These levels are achieved with all faders/gain trims set to maximum level.

RCA Output:

  • · 3.75 Vrms, +13.7 dBu, with a 0 dBFS sine wave input
  • · 1.15 Vrms, +3.7 dBu, with a 0 dBFS sine wave input
  • · 0.375 Vrms, --6.3 dBu, with a 0 dBFS sine wave input
  • · 0.115 Vrms, --16.3 dBu, with a 0 dBFS sine wave input
  • These levels are achieved with all faders/gain trims set to maximum level.

Synchronization

  • · Via the input signal
  • · Via the internal oscillator
  • · Via a word-clock signal (TTL level/75 OO) on the BNC input
  • · Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
  • · Word-clock output (TTL level/75 OO) on BNC for synchronization of other equipment
  • Measurements (internal DAC option installed)
    The measurements below have been taken at the following conditions (unless noted otherwise): 1 kHz measurement frequency, maximum selectable output level, 192 kHz sampling frequency (Fs), 22 kHz measurement bandwidth, unweighted, 0 dBr equals the output level at 0 dBFS input.

Frequency Response:

  • · Fs = 44.1 kHz, Fil­ter A, 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 44.1 kHz, Fil­ter B, 0 Hz…20 kHz: within ±1.3 dB
  • · Fs = 88.2 kHz, Fil­ter A, 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 88.2 kHz, Fil­ter A, 0 Hz…40 kHz: within ±0.8 dB
  • · Fs = 88.2 kHz, Fil­ter B, 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 88.2 kHz, Fil­ter B, 0 Hz…40 kHz: within ±1.5 dB
  • · Fs = 176.4 kHz, Fil­ter A, 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 176.4 kHz, Fil­ter A, 0 Hz…40 kHz: within ±0.8 dB
  • · Fs = 176.4 kHz, Fil­ter A, 0 Hz…80 kHz: within ±2.5 dB
  • · Fs = 176.4 kHz, Fil­ter B, 0 Hz…20 kHz: within ±0.25 dB
  • · Fs = 176.4 kHz, Fil­ter B, 0 Hz…40 kHz: within ±0.8 dB
  • · Fs = 176.4 kHz, Fil­ter B, 0 Hz…80 kHz: within ±3.5 dB
  • Total Harmonic Distortion plus Noise (THD+N):
  • · 116 dBr (0.00016 %) at --3 dBFS in­put level
  • · 125 dBr (0.000056 %) at --40 dBFS in­put level
  • · 125 dBr (0.000056 %) at --70 dBFS in­put level
  • Linearity:
    At 0 dBFS to --120 dBFS in­put level: less than ±0.4 dB deviation from ideal

Spurious components (including harmonics):

  • · At 0 dBFS in­put level, maximum output level, 1 kHz, all components at less than --120 dBr
  • · At 0 dBFS in­put level, maximum output level, 4 kHz, all components at less than --115 dBr
  • Crosstalk:
    Better than 120 dB, 20 Hz…20 kHz

Interchannel Phase Response:

  • · ±0.05° 20 Hz…20 kHz
  • · ±0.30° 20 Hz…80 kHz
  • Supported file formats for playback
  • · wav 44.1…192 kHz, 8…32 Bit, float, double
  • · aiff 44.1…192 kHz, 8…32 Bit, float, double
  • · m4a/alac 44.1…192 kHz, 16…32 Bit
  • · m4a/aac 44.1…96 kHz
  • · flac 44.1…192 kHz, 16…24 Bit (32 not tested/unknown)
  • · ogg/vorbis
  • · wma 44.1…48 kHz
  • · wv (wavepack) 44.1…192 kHz, 8…32 Bit
  • · dsf (dsd format) with 2.8224 Mbit/s or 5.6448 Mbit/s data rate
  • · dsdiff (dsd format) with 2.8224 Mbit/s or 5.6448 Mbit/s data rate
AUDIO LIMITS LOGO 265 wide1

702.299.0567